Paper sleeve template maker
Measure a rectangular item at its widest points. Enter its dimensions in millimeters to size a four-panel paper band with two open ends.
Custom sizes need JavaScript. If the download buttons stay unavailable, use the fixed-size sample PDFs below.
Print at actual size. Check the 2 in or 50 mm line before cutting.
Print a fixed-size sample without JavaScript
These two-page PDFs fit a 90 × 60 × 25 mm item. Both cut a 190 × 55 mm strip with 1 mm clearance on each side. Choose the paper in your printer. Changes to the fields above apply only to the custom download.
How to measure your item
Lay the gift flat. Measure the length between the two open ends, the width across the front, and the thickness from front to back. Include any wrapping already on the item. Band width controls how much of its length the paper covers.
Check the flat strip
For a 90 × 60 × 25 mm gift with 1 mm clearance on each side, the four panels measure 62, 27, 62 and 27 mm. The 12 mm glue flap brings the strip to 190 mm. With a 55 mm band it cuts to 190 × 55 mm.
Print and try one sleeve
Download the two-page PDF for a template and a folding guide, or use the SVG for the cutting and folding lines. Select the matching Letter or A4 paper and print at Actual size (100%). Measure the 2 in or 50 mm line before you cut. Wrap the sample around the item and check how easily it slides out before gluing the flap.